Iron-Away Topping 12in x 10yds by Kimberbell

This Kimberbell Machine Embroidery Stabilizer features the following:

- Prevents stitches from sinking into plush, high-pile fabrics like terrycloth and fleece
- Slight texture allows stabilizer to grip plush fabrics
- Apply heat with iron and pressing cloth, melts in ten seconds with no residue left on project

Instructions for use: Place down before stitching desired stitch. Use Kimberbell paper tape to hold topping in place during embroidery. To remove, pull excess topping away from design. Cover with pressing cloth and gently press with a hot iron for ten seconds. Remaining topping will transfer to the pressing cloth. For smaller detail stitches, a heat tool held one to two inches away from project may be used to melt excess stabilizer.

* Non-Woven
* Heat Away
* Weight: Lightweight
* Single Sided
* Washing/Drying instructions: Follow Fabric Care instructions